Configuring Related Commands; Sntp Enable - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
26

26.1 Configuring Related Commands

26.1.1

sntp enable

Use this command to enable the SNTP function. Use the no form of this command to
restore the default value.
[no] sntp enable
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
SNTP
Commands
Disabled
Global configuration mode.
This command shows the parameters of SNTP.
DES-7210(config)# sntp enable
Command Description
show sntp Show the SNTP configuration.
clock Synchronize the software click with
update-calendar the hardware clock.
clock set Set the software clock.
Chapter 26 SNTP Configuration Commands
Configuration
26-1