Dot1X Timeout Supp-Timeout - D-Link DES-7200 Cli Reference Manual

Chapter 44 802.1X Configuration Commands
Related
commands
44.2.4

dot1x timeout supp-timeout

Use this command to set the authentication timeout between the device and the supplicant.
Use the no form of the command to restore it to the default setting.
dot1x timeout supp-timeout seconds
no dot1x timeout supp-timeout
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
44-8
Tx Timer Period:
Supplicant Timeout:
Server Timeout:
Re-authen Max:
Maximum Request:
Client Oline Probe:
Eapol Tag Enable:
Authorization Mode:
Command Description
show dot1x Show the information about 802.1x.
Parameter Description
Authentication timeout between the device and
seconds the supplicant The range is from 0 to 65535
seconds.
3 seconds.
Global configuration mode.
Use show dot1x command to show 802.1X configuration.
The following example sets the authentication timeout between the
device and the supplicant to 10s:
DES-7210# configure terminal
DES-7210(config)# dot1x timeout supp-timeout 10
DES-7210(config)# end
DES-7210# show dot1x
802.1X Status:
Authentication Mode:
Authed User Number:
DES-7200 CLI Reference Guide
3 sec
3 sec
10 sec
3 times
3 times
Disabled
Disabled
Group Server
Enabled
EAP-MD5
0