Ip Dhcp Relay Suppression - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
24.1.7

ip dhcp relay suppression

Use this command to enable the DHCP binding globally. The no form of this command
disables the DHCP binding globally and enables the DHCP relay suppression on the port.
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Command
service dhcp
Disabled.
Interface configuration mode.
After executing this command, the system will not relay the DHCP
request message on the interface.
The following example enables the relay suppression function on the
interface 1.
DES-7210#
DES-7210# configure terminal
DES-7210(config)# interface fastEthernet 0/1
DES-7210(config-if)# ip dhcp relay suppression
DES-7210(config-if)# exit
DES-7210(config)#
Command
service dhcp
Chapter 24 DHCP Relay Configuration Commands
Description
Enable the DHCP Relay.
Description
Enable the DHCP Relay.
24-5