D-Link DES-7200 Cli Reference Manual page 347

DES-7200 CLI Reference Guide
snmp-server user username groupname {v1 | v2 | v3 [encrypted] [auth {md5 | sha}
auth-password ] [priv des56 priv-password]} [access {num | name}]
no snmp-server user username groupname {v1 | v2c | v3 }
Parameter
description
Default
configuration
Command
mode
Examples
Parameter Description
username
User name
groupname Group name of the user.
SNMP version. But only SNMPv3 supports the
v1 | v2 | v3
following security parameters.
Input the password in cipher text mode.
In cipher text mode, input continuous HEX
alphanumeric
authentication password of MD5 has a length of 16
Encrypted
characters, while that of SHA has a length of 20
bytes. Two characters make a byte. The encrypted
key can only be used by the local SNMP engine on
the switch.
Authentication
auth-password
Auth characters) used by the authentication protocol. The
system
corresponding authentication key
Encryption mode.
encryption protocol.
priv-password: password string (no more than 32
priv
characters) used for encryption. The system will
change
encryption key.
N/A.
Global configuration mode.
The example below configures an SNMPv3 user with MD5
authentication and DES encryption:
DES-7210(config)# snmp-server user user-2 mib2user v3 auth md5
authpassstr priv des56 despassstr
Chapter 29 SNMP Configuration Command
characters.
md5
mode:
: Password string (no more than 32
will change the
des56 refers to 56-bit DES
the password to
Note that the
sha.
and
password to the
the corresponding
29-11