D-Link DES-7200 Cli Reference Manual page 1128

Chapter 63 File System Configuration Commands
Usage
guidelines
Examples
Related
commands
63.1.2 cp
Use this command to copy a file to the specified file or directory.
cp dest { destine_file | directory } sour source_file
cp sour source_file dest { destine_file | directory }
Parameter
description
Default
Command
mode
Usage
guidelines
Caution
63-2
Change the above parameter to the directory you want to enter. Use
the ―..‖ to represent the upeer-level directory and the ―.‖ to represent
the current-level directory. Others can be determined according to the
current location. This command supports relative directories and
absolute directories. After entering the specified directory, you can
verify it by using the ls command described above.
Enter the tmp sub-directory of the current directory:
DES-7210# cd tmp
Command
ls
Parameter
destine_file
directory
source_file
N/A.
Privileged EXEC mode.
Copy the specified file to a new file or a directory. If the file already
exists, the system will prompt whether to overwrite to cancel the
operation.
The current cp command does not support the wildcard and directory copy.
DES-7200 CLI Reference Guide
Description
Show the contents in the current directory.
Description
Destination file
Destination file or directory
Name of the file to copy (including the path)