Clear Ip Igmp Interface - D-Link DES-7200 Cli Reference Manual

Chapter 38 IGMP Configuration Commands
38.1.1 clear ip igmp group
Use this command to clear dynamic group member information obtained from the response
messages in the IGMP buffer.
Command
Syntax
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
38.1.2

clear ip igmp interface

Use this command to clear the IGMP entry for the interface.
Command
syntax
Parameter
description
38-2
clear ip igmp group[group-address | interface-type
interface-number]
Parameter Description
N/A Delete all group information.
32-bit multicast group IP address, namely
group-address Category D address. 8 bits are in one group in
decimal form. Groups are separated with dots.
interface-type Interface type.
interface-number Interface number.
Privileged mode.
The IGMP buffer includes a list that contains the multicast groups that
the hosts in the direct subnet join. If the device joins a group, this
group will be included in this list. To delete all the entries from the
IGMP buffer, use the clear ip igmp group command without
parameters.
Delete all group entries:
DES-7210# clear ip igmp group
show ip igmp groups
show ip igmp interface
clear ip igmp interface ifname
Parameter Description
ifname Name of the interface
DES-7200 CLI Reference Guide