Vrrp Monitoring And Maintenance Commands; Debug Vrrp - D-Link DES-7200 Cli Reference Manual

Chapter 57 VRRP Configuration Commands
Related
commands

57.2 VRRP Monitoring and Maintenance Commands

VRRP monitoring and maintenance commands include:


debug vrrp


debug vrrp errors

debug vrrp events

debug vrrp packets

debug vrrp state
57.2.1 debug vrrp
Use this command to turn on the VRRP error prompt, VRRP event, VRRP message and
status debug switches. The no form of this command turns off the switches.
debug vrrp
no debug vrrp
Default
configuration
Command
mode
57-30
DES-7210(config-if)#no switchport
DES-7210(config-if)#ip address 192.168.201.17 255.255.255.0
DES-7210(config-if)#vrrp 1 priority 120
DES-7210(config-if)#vrrp 1 ip 192.168.201.1
DES-7210(config-if)#vrrp 1 track bfd FastEthernet 0/1 192.168.1.3
30
DES-7210(config-if)#end
Command
DES-7210(config-if)#
vrrp group ip ipaddress
[ secondary ]
DES-7210(config-if)#
vrrp group priority level
By default, the debug switches are turned off.
Privileged mode.
DES-7200 CLI Reference Guide
Description
Enable the VRRP function and
set the IP address for the
virtual device.
Set the VRRP group priority.