Clear Arp-Guard Users - D-Link DES-7200 Cli Reference Manual

Chapter 53 NFPP Configuration Commands
Related
commands
53.1.7

clear arp-guard users

Use this command to clear the arp-guard users.
clear arp-guard users [vlan vid] [interface interface-id] [ip-address | mac-address]
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
53-8
Command Description
show
arp-guard View the arp-guard configuration.
configuration
clear arp-guard
Clear the arp-guard scan table.
scan
show
Show the arp-guard scan table.
arp-guard scan
Parameter Description
vid VLAN ID.
interface-id Interface name and interface id.
ip-address The IP address.
mac-address The MAC address.
Privileged EXEC mode.
Use the command without any parameters to clear all isolated users.
The example below shows how to clear the isolated users
on interface gigabitEthernet 0/1 in VLAN 1:
DES-7210(config)# clear arp-guard users vlan 1 interface
gigabitEthernet 0/1
Command Description
arp-guard Configure
attack-threshold attack-threshold.
show arp-guard
Show the isolated users.
users
DES-7200 CLI Reference Guide
the arp-guard