Set Interface - D-Link DES-7200 Cli Reference Manual

Chapter 34 Protocol-independent Configuration Commands
Related
commands

34.1.37 set interface

Use this command to specify the interface for forwarding the packets matching the rule in
the route map configuration mode. Use the no form of this command to remove the setting.
set interface interface-type interface-number [...interface-type interface-number]
no set interface interface-type interface-number [...interface-type interface-number]
Parameter
description
Default
Command
mode
Usage
guideline
34-50
Command
match as-path
match community
match metric
match origin
set as-path prepend
set metric
set metric-type
Parameter
interface-type
interface-number
None
Route map configuration mode
Multiple interfaces may follow the set interface command.
Policy-based routing is a packet forwarding mechanism
more flexible than the routing based on the target network.
If policy-based routing is used, the device will determine
how to process the packets to be routed according to the
route map, which determines the next-hop device of the
packets.
DES-7200 CLI Reference Guide
Description
Match the AS_PATH value
Match the community.
Match the metric.
Match the source.
Set the AS_PATH attribute.
Set the metric.
Set the metric type.
Description
Interface type.
Interface ID