DES-7200 CLI Reference Guide
34.2 Show Related Command
34.2.1
show route-map
Use the command to view the configuration of the route map in the privileged mode.
show route-map [route-map-name]
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Chapter 34 Protocol-independent Configuration Commands
Parameter
Description
(Optional) Show the configuration information of
route-map-name
the specified the route map.
The configuration information of all the route maps is displayed.
Privileged mode, global configuration mode, interface configuration
mode, routing protocol configuration mode, route map configuration
mode.
If no route map is specified, the configurations of all the route maps
will be displayed, otherwise only the configuration of the specified
route map is displayed.
DES-7210# show route-map
route-map AAA, permit, sequence 10
Match clauses:
ip address 2
Set clauses:
metric 10
Field
route-map
Permit
sequence 10
Match clauses
Set clauses
Description
Name of the route map.
The route map contains the
permit keyword.
Sequence number of the route
map.
Set the matching rule. Whether
to perform the set operation
depends on the permit or deny
keyword in the route map.
Setsthe operation when the rule
is matched.
34-75