Show Arp - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
21.4.2

show arp

Use this command to show the Address Resolution Protocol (ARP) cache table
show arp [ip [mask] | mac-address] | static | complete | incomplete
Parameter
description
Command
mode
Examples
Command Description
Add a static mapping record to the ARP cache
arp
table.
Parameter Description
Show the ARP entry of the specified IP address.
ip
Show the ARP entries of the network segment
ip mask
included within the mask.
Show the ARP entry of the specified MAC
mac-address
address.
Show all the static ARP entries.
static
Show all the resolved dynamic ARP entries.
complete
Show all the unresolved dynamic ARP entries.
incomplete
Any
The following is the output result of the show arp command:
DES-7210# show arp
Total Numbers of Arp: 7
Protocol Address
Interface
Internet 192.168.195.68
Internet 192.168.195.67
Internet 192.168.195.65
Internet 192.168.195.64
Internet 192.168.195.63
Internet 192.168.195.62
Internet 192.168.195.5
The meaning of each field in the ARP cache table is described as
below:
Table 1 Fields in the ARP cache table
Chapter 21 IP Address Configuration Commands
Age(min) Hardware
0 0013.20a5.7a5f arpa
0 001a.a0b5.378d arpa
0 0018.8b7b.713e arpa
0 0018.8b7b.9106 arpa
0 001a.a0b5.3990 arpa
0 001a.a0b5.0b25 arpa
-- 00d0.f822.33b1 arpa
Type
VLAN 1
VLAN 1
VLAN 1
VLAN 1
VLAN 1
VLAN 1
VLAN 1
21-17