Ip Pim Register-Suppression; Ip Pim Rp-Address - D-Link DES-7200 Cli Reference Manual

Chapter 40 PIM-SM Configuraiton Commands
Examples

40.1.17 ip pim register-suppression

ip pim register-suppression seconds
Parameter
description
Default
Command
mode
Usage
guideline
Examples

40.1.18 ip pim rp-address

ip pim rp-address rp-address [access_list]
Parameter
description
Default
40-12
DES-7210# configure terminal
DES-7210(config)# ip pim register-source 192.168.195.80
DES-7210(config)# ip pim register-source g 0/3
Parameter
suppression
By default, the register packet suppression time is 60
seconds.
Global configuration mode
Executing this command on the DR will change the register packet
suppression time configured. if the ip pim rp-register-kat command
is not configured, executing this command on RP will modify the
period of RP keepalive.
DES-7210# configure terminal
DES-7210(config)# ip pim register-suppression 100
Parameter
rp-address
access_list
No IP address is configured for the static RP by default.
DES-7200 CLI Reference Guide
Description
Suppression time in the range of
11 to 21843 seconds
Description
IP address of RP
Access control list supporting
numerical ACL in the range 1 to
99 and 1300 to 1999 and name
ACL. All multicast groups are
supported by default.