Arp Unresolve - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Command
mode
Usage
guidelines
Examples
Related
commands
21.2.6

arp unresolve

Use this command to configure the maximum number of the unresolved ARP entries. The
no form of this command can restore it to the default value 8192.
arp unresolve number
no arp unresolve
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Global configuration mode.
Use this command to set trusted ARP aging. Aging time is the same
as dynamic ARP aging time. Execute arp timeout to set aging time in
interface mode.
N/A
Command
service trustedarp
Parameter
number
The ARP cache table can contain up to 8192 unresolved entries.
Global configuration mode.
If there are a large number of unresolved entries in the ARP cache
table and they do not disappear after a period of time, this command
can be used to limit the quantity of the unresolved entries.
Chapter 21 IP Address Configuration Commands
Description
Enable trusted ARP function.
Description
The maximum number of the unresolved ARP
entries in the range of 1 to 8192. The default
value is 8192.
21-9