Match Ip/Mac Address - D-Link DES-7200 Cli Reference Manual

Chapter 55 VACL Configuration Commands
Command
mode
Examples
55.1.2

match ip/mac address

Use this command to associate ip acl or mac acl with the specified subvlan access map.
The no form of this command removes the configuration.
match ip address { acl_name | acl_id }+
no match ip address { acl_name | acl_id }+
match mac address { acl_name | acl_id }+
no match mac address { acl_name | acl_id }+
Caution
Parameter
description
Command
mode
55-2
Global configuration mode.
The following example shows how to create vlan access map：
DES-7210(config)# vlan access-map ddd 20
DES-7210(config-access-map)#
+_indicates associating at least one acl. It can associate 8 acls at most.
Parameter
acl_name
acl_id
Config-access-map mode, that is vacl mode.
1..One submap can only be associated with ip acl or map acl. You can
not associate a submap with both ip acl and map acl.
2..One submap can only be associated with at most 8 acls.
3. One submap can not be associated with an inexistent acl.
4. One submap can not be associated with acl without ace, which is null
acl.
Note
5. When a submap has been associated with ip acl (mac acl), you need
to configure to associate ip acl (mac acl) again. And ip acl (mac acl) later
configured is after the one first configured.
DES-7200 CLI Reference Guide
Description
Name acl.
Numbered acl