Show Spanning-Tree Interface - D-Link DES-7200 Cli Reference Manual

Chapter 18 MSTP Configuration Commands
Command
mode
Examples
Related
commands
18.2.2

show spanning-tree interface

Use this command to show the STP configuration of the interface, including the optional
spanning tree.
show spanning-tree interface interface-id [{bpdufilter | portfast | bpduguard |
link-type } ]
Parameter
description
Command
mode
18-22
pathcost method
Privileged EXEC mode.
DES-7210# show spanning-tree hello-time
Command
spanning-tree
pathcost method
spanning-tree
forward-time
spanning-tree
hello-time
spanning-tree
max-age
spanning-tree
max-hops
spanning-tree
tx-hold-count
Parameter Description
interface-id Interface ID
bpdufilter Show the status of BPDU filter.
portfast Show the status of portfast.
bpduguard Show the status of BPDU guard.
link-type
Show the link type of an interface.
Privileged EXEC mode.
DES-7200 CLI Reference Guide
Show the method used for calculating path
cost.
Description
Set the pathcost method.
Set BridgeForwardDelay.
Set BridgeHelloTime.
Set BridgeMaxAge.
Set the maximum hops of an instance.
Show TxHoldCount.