D-Link DES-7200 Hardware Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DES-7200
  6. Hardware installation manual
D-Link DES-7200 Hardware Installation Manual

D-Link DES-7200 Hardware Installation Manual

Hide thumbs Also See for DES-7200:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Hardware Installation Manual
DES-7200
Hardware Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for D-Link DES-7200

Summary of Contents for D-Link DES-7200

  • Page 1 DES-7200 Hardware Installation Guide...
  • Page 2 This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain the latest information through the D-Link Corporation website. D-Link Corporation endeavors to ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to content omissions,...
  • Page 3 Documentation CD-ROM: The documentation of D-Link Corporation switches is stored in the CD-ROM package, which is provided to you together with the product you purchase. The CD-ROM is updated frequently, and may be more current than the printed documents.

  • Page 4: Documentation Conventions

    D-Link Corporation provides excellent technical support services for all our products. You can obtain the technical assistance you need through any of the following channels: Technical Assistance  D-Link Corporation Website, On D-Link Corporation Website, you can obtain the latest technical information, reasons of common faults, problem analysis, product application solution and software upgrading information.

  • Page 5: Table Of Contents

    Contents Product Overview ..........................1-1 Product Overview ........................1-1 Technical Specifications of DES-7206/7210 ................1-2 1.2.1 Product Features ......................1-2 1.2.2 Technical Specifications ....................1-4 Product Appearance ........................1-6 1.3.1 Appearance of the DES-7210 ..................1-6 1.3.2 Appearance of the DES-7206 ..................1-7 DES-7206/7210 Hardware Composition..................
  • Page 6 Requirements of Installation Tools ..................... 2-9 Unpacking Inspection Requirements ..................2-9 2.5.1 Checking Goods ......................2-9 Product Installation..........................3-1 Installation Flow ......................... 3-2 Installation Verification ....................... 3-3 Cabinet Installation ........................3-3 3.3.1 Precautions ........................3-3 3.3.2 Simple Installation Steps ....................3-3 Mounting the DES-7210/7206 into the Cabinet .................
  • Page 7 Troubleshooting ..........................5-1 General Flow for Troubleshooting Installation Faults..............5-1 Common Troubleshooting Procedures ..................5-2...

  • Page 9: Product Overview

    Ethernet gains rapid development and wide application in the broadband access field. In this situation, D-Link Corporation introduces high-density multi-service IPv6 core router switch DES-7200 by sparing great efforts, after the release of the multi-service 10-Gigabit core router switch DES-7200 being applicable to the backbone Ethernet. DES-7200, as a multi-service IPv6 10-Gigabit core router switch of the new generation, provides powerful defense ability while ensuring high performance and large capacity.

  • Page 10: Technical Specifications Of Des-7206/7210

     Hot-swappability With a modular design, all the switching modules, management modules, power supply, and fan tray of the DES-7200 are hot swappable, allowing modules to be replaced without first shutdown of the system.  Redundancy configuration...
  • Page 11 The DES-7200 supports multiple STPs and VRRPs including 802.1D, 802.1W, and 802.1S, offering sophisticated dual-core assurance technologies.  Providing visual status display DES-7200 is embedded with an LCD screen, used for providing current system information such as working time and system utilization.  Supporting the advanced 10-Gigabit Ethernet technology DES-7200 provides current mainstream 10-Gigabit LAN transmission standards such as 10GBASE-R and 10GBASE-W.

  • Page 12: Technical Specifications

    DES-7200 Hardware Installation Guide 1.2.2 Technical Specifications Table 1-1 Technical Specifications Product Model DES-7210: DES-7206: 10 (two for the management engine 6 (two for the management engine Module slot modules) modules) VLAN IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ae, IEEE802.3x, IEEE802.3ad, IEEE802.3af, IEEE802.1p, IEEE802.1x, IEEE802.3ab, L2 Protocol IEEE802.1Q, IEEEE802.1d, IEEEE802.1w, IEEEE802.1s, RERP,...
  • Page 13 DES-7200 Hardware Installation Guide Product Model DES-7210: DES-7206: 7210-FAN (supporting hot swap 7206-FAN (supporting hot swap ability ability and fault alarming) and fault alarming) Environment GB9254-1998 FCC Class A Safety regulation GB4943-2001 MTBF 438,352hrs 505,339hrs Operating 0 to 40°C temperature Storage -40 to 70°C...

  • Page 14: Product Appearance

    DES-7200 Hardware Installation Guide Product Appearance 1.3.1 Appearance of the DES-7210 Figure 1-1 Appearance of the DES-7210 Air outlet layer: the air outlet layer of the entire system, discharging air on three sides; Fan tray: the slot for the fan tray, which is the main heat dissipation unit of the system;...

  • Page 15: Appearance Of The Des-7206

    DES-7200 Hardware Installation Guide 1.3.2 Appearance of the DES-7206 Figure 1-2 Appearance of the DES-7206 Module layer: offering up to 6 module slots; Power layer: supporting two AC or DC power supplies for the maximum. Air outlet: located at the back of the chassis to discharge air.

  • Page 16: Module Plug-In Frame

    412 mm, depth of 350 mm, and thickness of 2.0 mm. The DES-7200 backplane implements the interconnection of high-speed data links between the switching management cards and module line cards and that of various management and control signals.

  • Page 17: Ventilation/Heat Dissipation System Of The Des-7206/7210

    DES-7200 Hardware Installation Guide The slots for the two management modules are in the middle, and they are identified as M1 and M2 from left to right. The other eight module line cards are numbered as 1-8 from the left to the right.

  • Page 18: Des-7206/7210 Modules

    DES-7200 Hardware Installation Guide Figure 1-4 Ventilation/Heat Dissipation Solution of the DES-7206 This structure is designed with air inlet from the front panels of the modules, and air outlet at the back. Six 120*120*38 fans are used to blow the air to the outside for convection and ultimately heat dissipation.
  • Page 19 DES-7200 Hardware Installation Guide 7200-2XG module: It provides two 10-Gigabit XFP interfaces. It features the functions of layer-2/3 wire speed switching and routing, and supports multi-mode XFP module with the wavelength being 850nm, single-mode XFP module with that being 1310nm, and single XFP module with that being 1550nm.

  • Page 20: 7200-Cm1~4 Control Modules

    DES-7200 Hardware Installation Guide 1.6.1 7200-CM1~4 Control Modules: Figure 1-5, 1-7 shows the basic appearance of the 7200-CM1/CM3 which is the major management module of the DES-7206; Figure 1-6, 1-8 shows the basic appearance of the 7200-CM2/CM4 which is the major management module of DES-7210. The 7200 Control Module performs such functions as system switching, system status control, route management, user access control and management, and network maintenance.
  • Page 21 Note To secure data and prevent damage on the device, it is recommended to use qualified USB flash disk. The USB interface of DES-7200 is compatible with most USB controllers. Some types of USB flash disk may not be identified. You are recommended to use Patriot and Start-net Digital Note USB flash disk.

  • Page 22: 7200-24G Module

    DES-7200 Hardware Installation Guide Product Model 7200-CM1 7200-CM2 7200-CM3 7200-CM4 Status, Primary, Alarm and 10/100M MGMT Port LED Hot swap ability Supported Management Supported redundancy Power consumption <30W <50W GB9254-1998 FCC Class A Safety regulation GB4943-2001 MTBF 246,987hrs 240,558hrs 174,420hrs...

  • Page 23: 7200-24 Module

    DES-7200 Hardware Installation Guide Table 1-4 LEDs on the Front Panel Sign Description Detailed Information OFF: The module has not been powered on Red: Module fault Status System LED Flashing green: The module is initializing Solid green: The module has finished initialization and can...
  • Page 24 DES-7200 Hardware Installation Guide Figure 1-10 Basic Appearance of the 7200-24 1. Interface 7200-24: It provides twelve 10/100/1000BASE-T electrical ports and twelve optical/electrical combo 1000M interfaces, and supports up to twenty-four 1000BASE-T interfaces or 12+M 1000BASE-T interfaces and N 1000BASE-X interfaces, where M plus N equals 12. When the function of automatic negotiation is enabled, the 1000M electrical interface supports automatic MDI/MDI-X identification.

  • Page 25: 7200-48 Module

    7200-48 Module Figure 1-11 shows the basic appearance of the 7200-48, the line card module of the DES-7200 series. The 7200-48 provides 44 10/100/1000BASE-T electrical 1000M interfaces and 4 optical/electrical combo 1000M interfaces, which deliver L2/L3 wire-speed switching. The 7200-48 is hot swappable.
  • Page 26 DES-7200 Hardware Installation Guide 2. LEDs The 7200-48 provides various system LEDs, as described in the following table: Table 1-8 LEDs on the Front Panel Sign Description Detailed Information OFF: The module has not been powered on. Red: Module fault...

  • Page 27: 7200-2Xg Module

    Figure 1-12 shows the basic appearance of the 7200-2XG, which is the line card module of the DES-7200 series. 7200-2XG provides two 10-Gigabit XFP interfaces and features the function of layer-2/3 wire speed switching. The 7200-2XG is hot swappable, while supporting hot swappability of the XFP ports.

  • Page 28: 7200-4Xg Module

    7200-4XG Module Figure 1-13 shows the basic appearance of the 7200-4XG, the line card module of the DES-7200 series. 7200-4XG provides four 10-Gigabit XFP interfaces and features the functions of layer-2/3 wire speed switching. The 7200-4XG is hot swappable. Figure 1-13 Basic Appearance of the 7200-2XG 1.

  • Page 29: 7200-24P Module

    7200-24P Module Figure 1-14 shows the basic appearance of the 7200-24P, which is the line card module of the DES-7200 series. 7200-24P provides twelve 10/100/1000BASE-T electrical ports and twelve optical/electrical combo 1000M interfaces, and supports up to twenty-four 1000BASE-T interfaces or 12+M 1000BASE-T interfaces and N 1000BASE-X interfaces, where M plus N equals 12.
  • Page 30 DES-7200 Hardware Installation Guide The 7200-24P provides twelve SFP optical ports and 10/100/1000BASE-T ports that are in the combo form. In other words, each SFP port corresponds to one 10/100/1000BASE-T port, and only one port can be used at a time, with the other being unavailable. The MDI/MDI-X automatic...

  • Page 31: 7200-48P Module

    7200-48P Module Figure 1-15 shows the basic appearance of the 7200-48P, the line card module of the DES-7200 series. 7200-48P provides 44 10/100/1000BASE-T electrical 1000M interfaces and 4 optical/electrical combo 1000M interfaces, and supports up to 48 1000BASE-T interfaces or 44+M 1000BASE-T interfaces and N 1000BASE-X interfaces where M plus N equals 4.
  • Page 32 DES-7200 Hardware Installation Guide 7200-48P does not support the hot pull-out operation. You need to perform the following operations to achieve it: Disconnect all cables connected to the cable card ports; Warning Hold the Mode button for over three seconds until all LEDs on the cable card ports go off;...

  • Page 33: 7200-24Ge Module

    Figure 1-16 shows the basic appearance of the 7200-24GE, the line card module of the DES-7200 series. 7200-24GE 24 1000M and 100M combo SFP interfaces, that is, it supports 1000BASE-X and 100BASE-X modes. It features the function of layer-2/3 wire speed switching.

  • Page 34: 7200-24G2Xge Module

    1.6.10 7200-24G2XGE Module Figure 1-17 shows the basic appearance of 7200-24G2XGE, the link card of DES-7200 series. 7200-24G2XGE comes with two 10G XFP ports, 12 gigabit SFP ports and 12 gigabit optical-electrical multiplex ports, and supports up to 2 XFP ports plus 24 1000BASE-X interfaces, or 2 XFP ports plus 12+M 1000BASE-X interfaces + N 1000BASE-T interfaces where M+N=12.
  • Page 35 DES-7200 Hardware Installation Guide 1. Interface 7200-24G2XGE comes with two 10G XFP ports, 12 gigabit SFP ports and 12 gigabit optical-electrical multiplex ports, and offers gigabit-level line rate of Layer 2/3 switching. With auto-negotiation enabled, the gigabit electrical port supports automatic MDI/MDI-X identification.

  • Page 36: 7200-48E Module

    436*346*45mm ( L x W x H) 1.6.11 7200-48E Module Figure 1-18 is the basic appearance of 7200-48E, the line card of DES-7200 series. 7200-48E comes with 44 10/100/1000BASE-T gigabit electric interfaces and 4 electric-optic multiplexing gigabit interfaces. 7200-48E supports hot-swapping as well as hot-swapping on SFP ports.

  • Page 37: 7200-Ase3 Module

    DES-7200 Hardware Installation Guide Sign Description Detailed Information Electric port: Off: The port is not linked. Green: The port is linked at 1000M. Orange: The port is linked at 10/100M. Port status Link/ACT Flashing green: Data is transmitted through the port.

  • Page 38: 7206/7210-Fan Module

    DES-7200 Hardware Installation Guide Figure 1-19 Basic Appearance of the 7200-ASE3 1. Indicators 7200-ASE3 module provides the LEDs for indicating system status, as described in the following table: Table 1-24 LEDs on the Front Panel Sign Description Detailed Information OFF: The module has not been powered on.

  • Page 39: 7200-1200Ac/2000Ac Power Module

    DES-7200 Hardware Installation Guide Table 1-26 LEDs on the Front Panel of the 7210-FAN Sign Description Detailed Information OFF: The fan tray has not been powered on Power Power LED Solid green: The fan module is normally powered on OFF: Normally working...

  • Page 41: Preparation Before Installation

    DES-7200 Hardware Installation Guide Preparation Before Installation Safety Suggestions To avoid personal injury and equipment damage, please carefully read the safety suggestions before you install the DES-7210/7206. The following safety suggestions do not cover all possible dangers. Note 2.1.1 Safety Precautions for Installing the System ...

  • Page 42: Electrical Safety

    DES-7200 Hardware Installation Guide Figure 2-1 Schematic Diagram for Correctly Moving the DES-7210 Figure 2-2 Schematic Diagram for Correctly Moving the DES-7206 Do not move the equipment by grasping the panel, power supply handle, ventilation holes of the chassis, as they are not designed to bear the weight of the entire equipment.

  • Page 43: Static Discharge Damage Prevention

    DES-7200 Hardware Installation Guide  Do not maintain the equipment alone when it is energized, unless absolutely necessary.  Be sure to make a careful check before you shut down the power supply.  Do not place the equipment in a damp/wet location. Do not let any liquid enter the chassis ...

  • Page 44: Laser Safety

    DES-7200 Hardware Installation Guide 2.1.5 Laser Safety Among the modules supported by the DES-7210/7206, there are a great number of optical modules that are Class I laser products. Therefore, pay attention to the following during your use of this product: ...
  • Page 45 DES-7200 Hardware Installation Guide Figure 2-3 Schematic Diagram for the Ventilation of the DES-7210 Figure 2-4 Schematic Diagram for the Ventilation of the DES-7206...

  • Page 46: Temperature And Humidity Requirements

    DES-7200 Hardware Installation Guide 2.2.3 Temperature and Humidity Requirements To ensure the normal working and a prolonged useful life of the DES-7210/7206, appropriate temperature and humidity must be maintained in the equipment room. If the equipment room has temperature and humidity that do not meet the requirements for a long time, the equipment may be damaged.

  • Page 47: Power Requirements

    DES-7200 Hardware Installation Guide Apart from dust, the salt, acid and sulfide in the air in the equipment room must also meet strict requirements, as such poisonous substances may accelerate the corrosion of the metal and the aging of some parts. The equipment room should be protected from the intrusion of harmful gases (for example, sulfur dioxide, sulfured hydrogen, nitrogen dioxide, and chlorine), whose requirements are listed in Table 2-3.

  • Page 48: Emc Ground

    DES-7200 Hardware Installation Guide 2.3.3 EMC Ground The ground required for EMC design includes shielding ground, filter ground, noise and interference suppression, and level reference. All the above constitute the comprehensive grounding requirements. The grounding resistance should be less than 1. The DES-7210/7206 chassis is installed with two grounding posts, as shown in Figure 2-5.

  • Page 49: Precaution For Fiber Connection

    DES-7200 Hardware Installation Guide Keep the equipment away from high-power radio transmitter, radar transmitting station, and high-frequency large-current device. Measures must be taken to isolate static electricity. 2.3.5 Precaution for Fiber Connection Before you connect the fibers, verify that the optical connector type and fiber type match the optical interface type used, and pay attention to the Tx and Rx directions of the fiber.

  • Page 51: Product Installation

    DES-7200 Hardware Installation Guide Product Installation Before you install the DES-7210/7206, make sure you have carefully read Chapter 2 and this chapter. Make sure that the requirements set forth in Chapter 2 have been Note met.

  • Page 52: Installation Flow

    DES-7200 Hardware Installation Guide Installation Flow Assembly of the DES-7210/7206 before installation Install the cabinet Mount the DES-7210/7206 into the cabinet Connect the system ground Connect the power supply (AC or DC) Insert various modules Connect external port cables or fibers of...

  • Page 53: Installation Verification

    DES-7200 Hardware Installation Guide Installation Verification The DES-7210/7206 is a kind of complicated equipment, so you must carefully plan and arrange its installation location, networking mode, power supply, and wiring before installation. Verify the following before installation:  The installation location offers sufficient flow of air.

  • Page 54: Mounting The Des-7210/7206 Into The Cabinet

    DES-7200 Hardware Installation Guide Install the tray and wiring layer on the rack according to the configuration of one rack with one cabinet and one rack with multiple cabinets. Mounting the DES-7210/7206 into the Cabinet 3.4.1 Precautions Before the DES-7210/7206 is mounted into the cabinet, first verify that the front and back brackets of the cabinet are at the right locations.

  • Page 55: Installing The Power Supply

    DES-7200 Hardware Installation Guide Figure 3-1 Installing the Fan Tray of the DES-7210 Figure 3-2 Installing the Fan Tray of the DES-7206 Installing the Power Supply The DES-7210/7206 system provides AC and DC power, which can be installed in the same...
  • Page 56 DES-7200 Hardware Installation Guide Figure 3-3 Schematic Diagram for Installing the Power Supply of the DES-7210 Figure 3-4 Schematic Diagram for Installing the Power Supply of the DES-7206...
  • Page 57 DES-7200 Hardware Installation Guide Insert the power supply module into the cabinet along the guide rail, as shown in Figure 3-6 and Figure 3-7: Figure 3-5 Schematic Diagram for Installing the Power Supply of the DES-7210 Figure 3-6 Schematic Diagram for Installing the Power Supply of the DES-7206...
  • Page 58 DES-7200 Hardware Installation Guide Tighten the screws on both sides of the power supply by using a straight screwdriver, as shown in Figure 3-8 and Figure 3-9. Figure 3-7 Schematic Diagram for Installing the Power Supply of the DES-7210 Figure 3-8 Schematic Diagram for Installing the Power Supply of the DES-7206...

  • Page 59: Installing The Handle

    DES-7200 Hardware Installation Guide Installing the Handle For easy handling of the system, the DES-7210/7206 chassis is provided with a handle, which can be installed by performing the following steps: Align the handle with the sunk hole on the fastening bar;...

  • Page 60: Installing The Cabling Rack Of The Des-7210

    DES-7200 Hardware Installation Guide Installing the Cabling Rack of the DES-7210 The cabling rack of the DES-7210 can be performed by performing the following steps: Remove the blank panel of the tracing rack by loosing the captive screws with a straight screwdriver and the cross screws with a cross screwdriver, as shown in Figure 3-12.
  • Page 61 DES-7200 Hardware Installation Guide Figure 3-12 Installing the Cabling Rack of the DES-7210 Fasten the cabling rack by using the cross M3 screws provided, as shown in Figure 3-14. (The cabling rack is available in two sizes, and you can select the appropriate...

  • Page 62: Installing The Air Filter Of The Des-7210

    DES-7200 Hardware Installation Guide Installing the Air Filter of the DES-7210 Simply push the air filter of the DES-7210 into the cabinet along the guide rail, as shown in Figure 3-15. Figure 3-14 Installing the Air Filter of the DES-7210 You are recommended to install the air filter as the last step of the chassis installation.

  • Page 63: Precautions

    DES-7200 Hardware Installation Guide Figure 3-15 Connection of grounding posts on the DES-7210/7206 back 3.10.2 Precautions  The sectional area of the grounding cable should be determined according to the possible maximum current. Cables of good conductor should be used.

  • Page 64: Simple Connection Steps

    DES-7200 Hardware Installation Guide Figure 3-16 Schematic Diagram for the Connection of the DC Power Cable 3.11.2 Precautions  Before connecting the power supply, you must verify that the external power supply provided matches the power module installed of this equipment.

  • Page 65: Connecting The Cable Of The Management Module

    DES-7200 Hardware Installation Guide Figure 3-17 Schematic Diagram for the Connection of the AC Power Cable 3.12.2 Precautions  Before connecting the power supply, you must verify that the external power supply provided matches the power module installed of this equipment.

  • Page 66: Removing Boards From The Des-7210/7206

    DES-7200 Hardware Installation Guide 3.14 Removing Boards from the DES-7210/7206 3.14.1 Steps for Removing Boards Unplug all cables/fibers such as optical fibers and RJ45 twisted pairs from the panel. Tighten two captive screws on the panel. Draw out the board by holding the ejector with both hands, as shown in Figure 3-18 and Figure 3-20.

  • Page 67: Installing Boards On The Des-7210/7206

    DES-7200 Hardware Installation Guide Figure 3-19 Schematic Diagram for the Components of the DES-7206 3.15 Installing Boards on the DES-7210/7206 3.15.1 Simple Steps of Board Installation Remove the appropriate component card or blank panel according to 3.14. Replace it with the appropriate card and insert into the guide rail.

  • Page 68: 3.17 Binding The Cables

    Bind the drooping part of the optical fibers and twisted pairs of each board, and lead them to both sides of the chassis according to the convenience. For the DES-7200, you can lead out the optical fibers and twisted pairs by using the cabling chute on the chassis.

  • Page 69: Des-7210/7206 Maintenance

    Configuration information and status of the port  Working status of the fan and power supply  Temperature status of the system For the monitoring commands, see the DES-7200 Configuration Guide of the DES-7210/7206. DES-7210/7206 Hardware Maintenance 4.2.1 Board Maintenance When you need to replace a board in the case of a fault, perform replacement according to the instructions provided in Section 3.9.

  • Page 70: Power Supply Maintenance

    DES-7200 Hardware Installation Guide During the process, you should clean the air filter of the DES-7210/7206. Note 4.2.3 Power Supply Maintenance When the power supply fails, you only need to disconnect the power cable, loosen the two panel screws on the power module, unplug the power module, replace it with a good one, and tighten the panel screws, and then connect the power cables.

  • Page 71: Troubleshooting

    DES-7200 Hardware Installation Guide Troubleshooting General Flow for Troubleshooting Installation Faults Abnormal working after installation installation Check the cabinet Check mounting DES-7210/7206 in the cabinet connection Check the power Check the installation of the power module Check the line cards and other...
  • Page 72 The system login password of the switch is forgotten or lost, and so it is not possible to configure the data. [Troubleshooting] Please contact D-Link Customer Service Department for technical support. Fault 2: The AC power module does not work. [Fault Description] The Status LED of each line card is OFF, the Power LED of the fan tray is OFF (only for DES-7210), and the fan does not work.
  • Page 73 Check whether the configuration of the serial port on the super terminal is the same as that described in DES-7200 Configuration Guide. If not, modify the serial port configuration parameters. If there is still no serial port printed information, please contact D-Link Customer Service Department for technical support.
  • Page 74 DES-7200 Hardware Installation Guide The serial port console outputs illegible characters. [Troubleshooting] Such problem is related to the settings of the serial port. Check if the settings of such parameters as the baud rate match those in the DES-7210/7206 Configuration Guide.
  • Page 75 DES-7200 Hardware Installation Guide Appendix Connectors and Connection Media 1000BASE-T/100BASE-TX/10BA SE-T Port The 1000BASE-T/100BASE-TX/10BASE-T is a port that supports adaptation of three rates, and automatic MDI/MDIX Crossover at these three rates. The 1000BASE-T complies with IEEE 802.3ab, and uses the cable of 100-ohm Category-5 or Supper Category-5 UTP or STP, which can be up to 100 m.
  • Page 76 Appendix DES-7200 Hardware Installation Guide Figure A-3 Connections of the Twisted Pairs of the 100BASE-TX/10BASE-T Optical Fiber Connection For the optical fiber ports, select single-mode or multiple-mode optical fibers for connection according to the fiber module connected. The connection schematic diagram is shown in...
  • Page 77 DES-7200 Hardware Installation Guide Appendix Mini-GBIC and 10G XENPAK Modules We provide the appropriate 1000M SFP module (Mini-GBIC module) and 10G XENPAK module for the types of interfaces of the switch modules. You can select the SFP or XENPAK module to suit your specific needs. Below the models and technical specifications of some 1000M SFP and 10G XENPAK modules are listed for your reference.
  • Page 78 Models and Technical Specifications of the 10G XENPAK Module Table B-2 Models and Technical Specifications of the 10G XENPAK Module Optical Core Modular Reception XENPAK Wavelength Transmission Standard Intensity Media Type Size Bandwidth sensitivity Model (nm) Distance Compliance (nm) (MHz/km) (MAX) (MAX) 62.5...
  • Page 79 DES-7200 Hardware Installation Guide Appendix Optical Core Modular Reception XENPAK Wavelength Transmission Standard Intensity Media Type Size Bandwidth sensitivity Model (nm) Distance Compliance (nm) (MHz/km) (MAX) (MAX) Single-mode optical fiber 10GBASE- 1310 Max. 10KM; 0.5dBm -12.6dBm connector) Single-mode optical fiber...

This manual is also suitable for:

Xstack des-7200 seriesXstack des-7210Xstack des-7206

Table of Contents