Showing Related Commands - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description

54.2 Showing Related Commands

The showing and monioring commands include:

show access-lists

show ip access-group

show expert access-group
Parameter
name
in
out
No ACL is applied on the interface.
Interface configuration mode.
Apply the specified IPV6 ACL on the specified interface to control the
interface traffic. You can view the configuration by command show
ipv6 traffic-filter.
The following example shows how to apply the access-list v6-acl to
Gigabit interface 1:
DES-7210(config)# interface GigaEthernet 0/1
DES-7210(config-if)# ipv6 traffic-filter v6-acl in
Command Description
Show the ACL configurations.
show
access-group
The software version must be R10.0 and higher.
Chapter 54 ACL Configuration Commands
Description
Name of Ipv6 ACL
Filter the incoming packets of the interface
Filter the outgoing packets of the interface
54-33