D-Link DES-7200 Cli Reference Manual page 701

DES-7200 CLI Reference Guide
Examples
Related
commands
37.2 Show Related Command
37.2.1 show ipv6 ospf
Use this command to show the information of the OSPFv3 process.
show ipv6 ospf [process-id]
Parameter
description
Command
mode
Examples
space will be occupied.
timers spf 2 4
Command Description
clear ipv6 ospf Restart part function of the OSPFv3.
show ipv6 ospf Show the OSPFv3 routing process information.
Parameter Description
process- id OSPF process number, 1-65535.
Privileged mode.
The following example shows the information about the OSPFv3
process.
DES-7210# show ipv6 ospf
Routing Process "OSPFv3 (1)" with ID 1.1.1.1
Process uptime is 24 minutes
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of incomming current DD exchange neighbors 0/5
Number of outgoing current DD exchange neighbors 0/5
Number of external LSA 0. Checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 11
Number of LSA received 4
Log Neighbor Adjency Changes : Enabled
Number of areas in this device is 2
Area BACKBONE(0)
Number of interfaces in this area is 1(1)
SPF algorithm executed 4 times
Number of LSA 3. Checksum Sum 0x1DDF1
Number of Unknown LSA 0
Chapter 37 OSPFv3 Configuration Commands
37-25