Show Arp-Guard Scan - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
53.2.3

show arp-guard scan

Use this command to show the arp-guard scan table.
show arp-guard scan [statistics | [[vlan vid] [interface interface-id] [mac-address]]]
Parameter
description
Command
mode
Examples
―remian-time(seconds)‖ refers to the isolated time remained
DES-7210# show arp-guard users
If column 1 shows '*', it means "hardware failed to isolate user".
VLAN interface
remain-time(seconds)
1 Gi0/1
2 Gi0/1
*3 Gi0/1
4 Gi0/1
Total：4 users
Command Description
Configure
arp-guard
threshold.
attack-threshold
clear arp-guard
Clear the isolated users.
users
Parameter Description
statistics Show the record statistics in the
arp-guard scan table.
vid VLAN ID.
interface-id Interface name and interface id.
mac-address The MAC address.
Privileged EXEC mode.
The following command shows the record number in the ARP scan
Chapter 53 NFPP Configuration Commands
Ip address MAC address
1.1.1.1 -
1.1.2.1 -
- 0000.0000.1111
- 0000.0000.2222
the arp-guard
110
61
110
61
attack
53-11