Neighbor Send-Community - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
Platform
description

33.1.59 neighbor send-community

Use this command to transmit the community attributes to the specified BGP neighbor. Use
the no form of the command to disable this function.
neighbor {peer-address | peer-group-name} send-community [both | standard |
extended]
no neighbor {peer-address | peer-group-name} send-community [both | standard |
extended]
Parameter
description
Default
configuration
Command
mode
Command Description
router bgp Enable the BGP protocol.
neighbor
Configure the BGP peer.
remote-as
Configure the cluster ID of the route reflectors.
bgp cluster-id
bgp
client-to-client Cancel the route reflection between clients
reflection
Parameter Description
IP address of the peer, IPv4 or IPv6
peer-addres
address
Name of the peer group of up to 32
peer-group-name
characters
Transmit both standard and extended
both
communities.
Transmit the standard community
standard
only.
Transmit the extended community
extended
only.
Disabled.
BGP configuration mode, address-family IPv4 configuration mode,
address-family IPv6 configuration mode, address-family IPv4 VRF
configuration mode and address-family IPv4 VPNv4 configuration
Chapter 33 BGP4 Configuration Commands
33-57