Chapter 44 802.1X Configuration Commands
Related
commands
44.3 dot1x Re-authentication Commands
Re-authentication commands include:
dot1x re-authentication
dot1x reauth-max
44.3.1
dot1x re-authentication
Use this command to enable periodic re-authentication. Use the no form of the command to
restore it to the the default setting.
[no] dot1x re-authentication
Parameter
description
Default
Command
mode
Usage
guidelines
44-10
Authentication mode: EAP-MD5
Authed User Number:
Re-authen Enabled:
Re-authen Period:
Quiet Timer Period:
Tx Timer Period:
Supplicant Timeout:
Server Timeout:
Re-authen Max:
Maximum Request:
Client Oline Probe:
Eapol Tag Enable:
Authorization Mode:
Command
Description
show dot1x
Show the information about 802.1x.
N/A.
By default, it is not required to re-authenticate the supplicant
periodically.
Global configuration mode.
This command will reauthenticate the supplicant periodically after he
passes the authentication. Use show dot1x command to show
802.1X configuration.
DES-7200 CLI Reference Guide
0
Disabled
1000 sec
1000 sec
10 sec
10 sec
10 sec
3 times
3 times
Disabled
Disabled
Group Server