D-Link DES-7200 Cli Reference Manual page 902

Chapter 44 802.1X Configuration Commands
Command
mode
Usage
guidelines
Examples
Related
commands
44-38
Privileged mode.
N/A.
The following example shows the information about the 802.1x
authentication user:
DES-7210# show dot1x user id 1
User name: caikov
id: 1
Type: static
Mac address is 0013.2049.8272
Vlan id is 217
Access from port Gi0/13
User ip address is 192.168.217.64
Max user number on this port is 6000
COS on this port is 5
Up-bandwidth is 1024 kbps
Down-bandwidth is 1024 kbps
Authorization vlan is dep7
Authorization seesion time is 1000000 seconds
Authorization ip address is 192.168.217.64
Start accounting
Permit proxy user
Permit dial user
IP privilige is 2
DES-7210#
Command Description
dot1x auth-mode Set the 802.1x authentication mode.
Set the maximum number of authentication
dot1x max-req
request retransmissions.
dot1x
Set the port to participate in authentication.
port-control auto
dot1x Set the maximum number of the supplicant
reauth-max re-authentications.
dot1x
Set the re-authentication attribute.
re-authentication
Set the time the device waits before
dot1x timeout
reauthentication.
quiet-period
DES-7200 CLI Reference Guide