D-Link DES-7200 Cli Reference Manual page 295

DES-7200 CLI Reference Guide
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
23.1.19 option
Use this command to configure the option of the DHCP server in the DHCP address pool
configuration mode. The no form of this command can be used to delete the definition of
option.
option code { ascii string | hex string | ip ip-address }
no option
Parameter
ip-address
ip-address2...ip-address8
N/A.
DHCP address pool configuration mode.
When more than one startup server is defined, the former will
possess higher priory. The DHCP client will select the next startup
server only when its communication with the former startup server
fails.
The configuration example below specifies the startup server
192.168.12.4 for the DHCP client.
next-server 192.168.12.4
Command
bootfile
ip dhcp pool
ip help-address
option
Chapter 23 DHCP Configuration Commands
Description
Define the IP address of the startup
server, which is usually the TFTP server.
It is required to configure one IP address
at least.
(Optional) Up to 8 startup servers can be
configured.
Description
Define the default startup mapping file name of
the DHCP client.
Define the name of the DHCP address pool and
enter into the DHCP address pool configuration
mode.
Define the Helper address on the interface.
Configure the option of the DES-7200 software
DHCP server.
23-19