D-Link DES-7200 Cli Reference Manual page 834

Chapter 42 MPLS Configuration Commands
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
42.2.17 rd
Use this command to define the RD value of the VRF
rd
rd-value
Parameter
description
Default
configuration
42-58
By default, the soo function is not enabled.
BGP IPv4 address family configuration mode
In the CE model, this command prevents the route information from
the CE to the PE to return to the CE end.
DES-7210(config)# router bgp 65000
DES-7210(config-router)# address-family ipv4 vrf vpn1
DES-7210(config-router-af)# neighbor 10.0.0.1 remote-as 100
DES-7210(config-router-af)# neighbor 10.0.0.1 soo 100:100
Command
router bgp
Parameter
rd_value
By default, no RD value is configured. The default RD value is 0:0.
DES-7200 CLI Reference Guide
Description
Enable BGP protocol
Description
The RD value.