Logging Console - D-Link DES-7200 Cli Reference Manual

Chapter 66 Syslog Configuration Commands
Usage
guidelines
Examples
Related
commands
66.1.6

logging console

Use this command to set the severity of logs that are allowed to be displayed on the console.
The no format of the command restores it to the default value.
logging console level
no logging console
66-6
If no Syslog Server is specified or it is not desired to transfer logs in
the network due to the consideration of security purpose, it is possible
to save the logs directly in flash.
The extension of the log file is fixed as txt. Any configuration of
extension for the filename will be refused.
Each syslog file has the limitation of the maximum
length. Before writing a new syslog to a file, the
Caution
followings help determine whether the maximum
length of the file has been exceeded:
A new syslog file will be created if the maximum length
has been exceeded;
Add a number to the name of the new file based on
the
filename_number with the suffix txt.
The maximum number is 15. The first file will be
overwritten if the number reaches 15. Therefore,
up to 16 files will be generated in the FLASH
when configuring the command to write one
syslog to the FLASH.
The example below records the logs in flash, with the name trace.txt,
file size 64K and log severity 6.
DES-7210(config)# logging file flash:trace
Command
logging on
show logging
more flash
DES-7200 CLI Reference Guide
original filename,
Description
Record logs on different devices.
Show the logs and related log configuration
parameters in the buffer.
View the logs in the flash.
in the format of