Show Redundancy Auto-Sync - D-Link DES-7200 Cli Reference Manual

Chapter 62 Supervisor Engine Redundancy Configuration Commands
Related
commands
62.2 Showing and Monitoring Commands
It includes the following commands:

show redundancy [state | auto-sync | switchtimeout]
62.2.1 show redundancy states
Use this command to show the current redundancy in the user mode or privileged EXEC
mode.
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
62.2.2

show redundancy auto-sync

Use command show redundancy auto-sync to show the current redundancy auto-sync
mode in user EXEC or privileged EXEC mode. For the detailed information, please refer to
auto-sync description in previous text.
62-6
Command Description
reload Reset the master supervisor engine.
Parameter Description
states Show the redundancy status of the master or the
slave devices.
N/A.
User mode or privileged EXEC mode
N/A.
DES-7210> enable
DES-7210# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7210# show redundancy states
Redundancy stats:
My state = 19 -ACTIVE
peer state = 37 -STANDBY HOT
...
DES-7200 CLI Reference Guide