Show Ip Rip Interface - D-Link DES-7200 Cli Reference Manual

Chapter 31 RIP Configuration Commands
Related
commands
31.2.4

show ip rip interface

Use this command to show the RIP interface information.
show ip rip interface [vrf vrf-name]
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
31-38
Protocol connected route:
[connected] 1.0.0.0/8 metric=0
nhop=0.0.0.0, if=2
[connected] 3.0.0.0/8 metric=0
nhop=0.0.0.0, if=16391
[connected] 4.4.0.0/16 metric=0
nhop=0.0.0.0, if=16388
[connected] 5.0.0.0/8 metric=0
nhop=0.0.0.0, if=16386
[connected] 192.168.195.0/24 metric=0
nhop=0.0.0.0, if=1
Command
show ip rip
Parameter Description
Show the RIP interface of specified VRF
vrf vrf-name
(optional).
N/A.
Privileged mode, global configuration mode, routing process
configuration mode.
The following is an example showing the RIP interface information.
DES-7210# show ip rip interface
FastEthernet 1/1 is down, line protocol is down
RIP is not enabled on this interface
FastEthernet 1/0 is up, line protocol is up
Routing Protocol: RIP
Receive RIPv2 packets only
Send RIPv2 packets only
DES-7200 CLI Reference Guide
Description
Show the information of the currently running
routing protocol process.