Show Mpls Label-Pool - D-Link DES-7200 Cli Reference Manual

Chapter 42 MPLS Configuration Commands

42.1.33 show mpls label-pool

Use this command to show the usage of the label pool in various label spaces. You can
show the data of all the label spaces, or that of a specific label space by specifying a label
space number.
show mpls label-pool [
Parameter
description
Command
mode
42-34
ILM entrys:14
ILM changes:14
ILM failed changes :0
IP FTN entrys:0
IP FTN changes:4
IP FTN faild changes:0
L2 FTN entrys:0
L2 FTN changes:0
L2 FTN faild changes:0
In label packets:0
Out label packets:0
Send label packets:0
In ip packets:0
Out ip packets:0
Out ip statck packets:0
Forwarding packets:0
Fragment packets:0
Fragment error packets:0
Label error packets:0
Label failed packets:0
Ttl over packets:0
Buffer failed packets:0
Ip don't fragment packets:0
Other failed packets:0
]
label-space
Parameter
label-space
Privileged user mode.
DES-7200 CLI Reference Guide
Description
Specify the label-space whose label pool is to
be shown.