Show Ip Igmp Interface - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
38.2.2

show ip igmp interface

Use this command to show the information of this interface.
Command
syntax
Parameter
description
Default
Command
mode
Examples
The following example shows detailed information about a specific
group:
DES-7210# show ip igmp groups 224.1.1.1 detail
Interface : eth1
Group: 224.1.1.1
Uptime: 00:00:42
Group mode: Include
Last reporter: 192.168.50.111
TIB-A Count: 2
TIB-B Count: 0
Group source list: (R - Remote, M - SSM Mapping)
Source Address Uptime v3 Exp Fwd Flags
192.168.55.55 00:00:42 00:03:38 Yes R
192.168.55.66 00:00:42 00:03:38 Yes R
Show ip igmp interface [interface-type interface-number]
Parameter Description
interface-type Interface type.
interface-number Interface number.
N/A Show information about all the interfaces.
User mode or privileged mode.
The following example shows the information of all the interfaces:
DES-7210# show ip igmp interface
Interface vlan1.1 (Index 4294967295)
IGMP Active, Non-Querier, Version 3 (default)
IGMP querying device is 0.0.0.0
IGMP query interval is 125 seconds
IGMP querier timeout is 255 seconds
IGMP max query response time is 10 seconds
Last member query response interval is 1000 milliseconds
Group Membership interval is 260 seconds|
Chapter 38 IGMP Configuration Commands
38-17