Security Channel - D-Link DES-7200 Cli Reference Manual

Chapter 54 ACL Configuration Commands
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description

54.3 Security Channel

Note
The commands in the global configuration mode:

security global access-group
The commands in the interface configuration mode:

security access-group

security uplink enable
54-38
Privileged mode.
Show the ACL applied to the interface. If no interface is specified, the
ACLs applied to all the interfaces will be shown.
DES-7210# show access-group
ip access-list standard ipstd3
Applied On interface GigabitEthernet 0/1.
ip access-list standard ipstd4
Applied On interface GigabitEthernet 0/2.
ip access-list extended 101
Applied On interface GigabitEthernet 0/3.
ip access-list extended 102
Applied On interface GigabitEthernet 0/8.
Command
ip access-group
mac access-group
expert access-group
ipv6 traffic-filter
The software version must be R10.0 and higher.
The security channel is not supported on the router platform.
DES-7200 CLI Reference Guide
Description
Define the IP ACL.
Define the extended MAC ACL.
Define the extended expert ACL
Define the extended IPv6 ACL.