Snmp-Server Contact; Snmp-Server Enable Traps - D-Link DES-7200 Cli Reference Manual

Chapter 29 SNMP Configuration Command
Related
commands
29.1.4

snmp-server contact

Use this command to specify the SNMP system contact in the global configuration mode.
The no form of this command is used to delete the system contact.
snmp-server contact text
no snmp-server contact
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
29.1.5

snmp-server enable traps

Use this command to enable the SNMP server to actively send the SNMP Trap massage to
NMS when some emergent and important events occur in the global configuration mode.
The no format of this command is used to disable the SNMP server to actively send the
SNMP Trap massage to NMS.
snmp-server enable traps
no snmp-server enable traps
29-4
Command
access-list
Parameter Description
text
String describing the system contact.
N/A.
Global configuration mode.
The example below specifies the SNMP system contract
i-net800@i-net.com.cn:
DES-7210(config)# snmp-server contact i-net800@i-net.com.cn
Command
show snmp-server
no snmp-server
[snmp ]
DES-7200 CLI Reference Guide
Description
Define the access list.
Description
Check the SNMP information.
Disable the SNMP agent function.