Show Ip Bgp Filter-List - D-Link DES-7200 Cli Reference Manual

Chapter 33 BGP4 Configuration Commands
33.2.8

show ip bgp filter-list

Use this command to show the routing information that matches the filtering list.
show ip bgp filter-list path-list-number
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
33.2.9 show ip bgp inconsistent-as
Use this command to show the route information of inconsistent source AS.
show ip bgp inconsistent-as
33-82
dampening 25 10000 10000 200
Dampening Control Block(s):
Reachability Half-Life time
Reuse penalty
Suppress penalty
Max suppress time
Max penalty (ceil)
Min penalty (floor)
Parameter Description
path-list-number Filtering list identifier
N/A.
Privileged EXEC mode.
This command is used to show the routing information that matches
the filtering list.
DES-7210(config)# ip as-path access-list 5 permit .*
DES-7210# show ip bgp filter-list 5
BGP table version is 1, local device ID is 192.168.88.200
Status codes: s suppressed, d damped, h history, * valid, > best,
i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop
*> 192.168.88.0 0.0.0.0
Total number of prefixes 1
DES-7200 CLI Reference Guide
: 25 min
: 10000
: 10000
: 200 min
: 29800000
: 5000
Metric LocPrf Weight Path
32768 ?