Default Configuration - D-Link DES-7200 Cli Reference Manual

Chapter 56 QoS Configuration Command
Default CoS to DSCP mapping table
CoS Value
DSCP value
Default IP Precedence to DSCP mapping table
IP-Precedence
DSCP
Default DSCP to CoS mapping table
DSCP
CoS
56.2 Related Configuration Commands
Use this command to configure the trust mode on an interface. Use the no form of this
command to restore it to the default.
mls qos trust [cos | dscp | ip-precedence]
no mls qos trust
Parameter
description
Default
configuration
56-2
0 1 2
0 8 16
0 1 2
0 8 16
0 8 16
0 1 2
56.2.1 mls qos trust
Parameter
cos
dscp
ip-precedence
no
N/A.
3 4 5
24 32 40
3 4 5
24 32 40
24 32 40
3 4 5
Description
The QoS trust mode of the port is
CoS.
The QoS trust mode of the port is
DSCP.
The QoS trust mode of the port is
IP-PRE.
Restore it to the default value.
DES-7200 CLI Reference Guide
6 7
48 56
6 7
48 56
48 56
6 7