Clear System-Guard [Interface Interface-Id [Ip-Address]] - D-Link DES-7200 Cli Reference Manual

Chapter 50 Anti-attack System Guard Configuration Commands
Command
mode
Usage
guidelines
Examples
Related
commands
50.1.7

clear system-guard [interface interface-id [ip-address]]

Use this command to clear the isolated IP address.
clear system-guard [interface interface-id [ip-address] ]
Parameter
description
Default
Command
mode
Examples
Related
commands
50-6
Global configuration mode.
This command is used to add an exceptional IP address for the
anti-attack function to allow it to access the interface.
In the global configuration mode, set the exceptional IP address
192.168.5.145 255.255.255.0, which is not monitored.
DES-7210(config-if)# system-guard exception-ip
192.168.5.145/24
Command Description
system-guard
Enable the anti-attack function.
enable
Parameter
interface interface-id
ip-address
N/A.
Privileged EXEC mode.
Clear the isolated IP addresses of the port fastethernet 0/1:
DES-7210(config)# clear system-guard interface
fastethernet 0/1
Command Description
system-guard
Enable the anti-attack function.
enable
DES-7200 CLI Reference Guide
Description
The interface.
The IP address.