D-Link DES-7200 Cli Reference Manual page 523

DES-7200 CLI Reference Guide
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
.Related
commands
Platform
description
Parameter Description
peer-address IP address of the peer, IPv4 or IPv6 address
peer-group-name Name of the peer group of up to 32 characters
0 Display the password with encryption.
7 Display the password without encryption.
Password for MD5 authentication in the range of
string
up to 80 characters
Disabled.
BGP configuration mod, address-family IPv4 configuration mode,
address-family IPv6 configuration mode, address-family IPv4 VRF
configuration mode.
This command will enable the MD5 authentication of the TCP. The
BGP peers must have the same password configured; otherwise, the
neighbor relationship cannot be established. When this command is
set, the local BGP speaker will re-establish the BGP connection with
the BGP peer.
If the BGP peer group is specified, all members of the peer group
inherit the settings of this command. If this command is set for a
member of the peer, the setting will overwrite the setting for the
group.
A neighbor has only one password, not one for every address family,
no matter in which mode it is configured.
DES-7210(config)# router bgp 65000
DES-7210(config-router)# neighbor 10.0.0.1 password
DES-7210
Command Description
router bgp Enable the BGP protocol
neighbor
Configure the BGP peer.
remote-as
Chapter 33 BGP4 Configuration Commands
33-49