Expert Access-Group - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
no mac access-group {id|name}{in|out}
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description

54.1.13 expert access-group

Use this command to apply the specified expert ACL on the specified interface. Use the no
form of the command to remove the application.
expert access-group {id|name} {in|out}
no expert access-group {id|name} {in|out}
Parameter
id
name
in
out
No ACL is applied on the interface.
Interface configuration mode.
N/A.
The following example shows how to apply the access-list
accept_00d0f8xxxxxx only to Gigabit interface 1:
DES-7210(config)#interface GigaEthernet 1/1
DES-7210(config-if)#mac access-group
accept__00d0f8xxxxxx_only in
Command Description
show Show the ACL configuration.
access-group
The software version must be R10.0 and higher.
Chapter 54 ACL Configuration Commands
Description
ID of the MAC ACL (700 to 799)
Name of the MAC ACL
Filter the incoming packets of the interface
Filter the outgoing packets of the interface
54-31