Snmp-Server Queue-Length; Snmp-Server System-Shutdown - D-Link DES-7200 Cli Reference Manual

Chapter 29 SNMP Configuration Command
29.1.9

snmp-server queue-length

Use this command to specify the length of the SNMP trap message queue in the global
configuration mode.
snmp-server queue-length length
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands

29.1.10 snmp-server system-shutdown

Use this command to enable the SNMP system restart notification function in the global
configuration mode. The no form of this command is used to disable the SNMP system
notification function.
snmp-server system-shutdown
no snmp-server system-shutdown
Default
configuration
29-8
Parameter Description
length Queue length in the range of 1 to 1000
10.
Global configuration mode.
The SNMP trap message queue is used to store the SNMP trap
messages. This command can be used to adjust the size of the
SNMP trap message queue to control the speed to sending the
SNMP trap messages.
The maximum speed to send messages is 4 messages per second.
The example below specifies the speed to send the trap message to
4 messages per second:
DES-7210(config)# snmp-server queue-length 4
Command Description
snmp-server
Specify the maximum size of the SNMP packet.
packetsize
Disabled.
DES-7200 CLI Reference Guide