Chapter 33 BGP4 Configuration Commands
33.1.69 network synchronization
Use this command to advertise the network information after the local BGP speaker is
synchronized with the local device. The no form of the command directly advertises the
network information.
network synchronization
no network synchronization
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
33.1.70 overflow memory-lack
Use this command to allow the BGP to enter the OVERFLOW state when the memory lacks.
Use the no form of this command to disable this function.
overflow memory-lack
no overflow memory-lack
33-68
N/A.
Enabled.
BGP configuration mode.
This command is used to modify the behavior of the network during
the process of advertisement. It is not recommended to turn off this
switch lest route black hole is caused.
DES-7210(config)# router bgp 65000
DES-7210(config-router)# network synchronization
Command
Description
Enable the BGP protocol.
router bgp
Configure the route redistribution.
redistribute
network(BGP)
Configure the route to be distributed.
DES-7200 CLI Reference Guide