Show Aaa Group - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
45.4.4
Use this command to show all the server groups configured for AAA.

show aaa group

Parameter
ip-addr
port1
port2
No server is configured.
Server group configuration mode.
Add a server to the specified server group. The default value is used
if no port is specified.
The following example adds a server to the server group.
DES-7210(config)# aaa group server radius ss
DES-7210(config-gs-radius)# server 192.168.4.12
acct-port 5 authen-port 6
DES-7210(config-gs-radius)# end
DES-7210# show aaa group
Group-name: ss
Group Type: radius
Referred:
Server List:
IP Address: 192.168.4.12
Authentication Port: 6
Accounting Port: 5
Referred: 1
Command
aaa group
server
show aaa group
show aaa group
Chapter 45 AAA Configuration Commands
Description
IP address of the server
Authentication port of the server
Accounting port of the server
2
Description
Configure the AAA server group.
Show the AAA server group information.
45-25