Aaa Authorization Exec - D-Link DES-7200 Cli Reference Manual

Chapter 45 AAA Configuration Commands
Examples
Related
commands
45.2.7
Use this command to apply the Exec authorization methos list to the specified terminal lines
in the line configuration mode. The no form of this command is used to disable the
authorization function.
authorization exec {default | list-name}
no authorization exec
Parameter
description
Default
Command
mode
Usage
guidelines
45-14
The following example configures the command authorization method
list with name cmd, authorizes command level 15, uses the TACACS+
server. If the security server does not response, it does not perform
authorization. After configuration, the authorization command is
applied to VTY 0-4 lines:
DES-7210(config)# aaa authorization commands 15 cmd group tacacs+
none
DES-7210(config)# line vty 0 4
DES-7210(config-line)# authorization commands 15 cmd
Command
aaa new-model
aaa
authorization
commands

aaa authorization exec

Parameter Description
default Use the default method of Exec authorization.
Apply
list-name
authorization.
Disabled.
Line configuration mode.
Once the default execauthorization method list has been configured,
it is applied to all terminals automatically. Once the non-default
Description
Enable the AAA security service.
Define the method list of the AAA
command authorization.
a defined method
DES-7200 CLI Reference Guide
list of Exec