D-Link DES-7200 Cli Reference Manual page 642

Chapter 34 Protocol-independent Configuration Commands
Examples
34-78
DES-7210# show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external
type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 -
IS-IS level-2
ia - IS-IS inter area, * - candidate default
Gateway of last resort is no set
S 20.0.0.0/8 is directly connected, VLAN 1
S 22.0.0.0/8 [1/0] via 20.0.0.1
O E2 30.0.0.0/8 [110/20] via 192.1.1.1, 00:00:06, VLAN
1
R 40.0.0.0/8 [120/20] via 192.1.1.2, 00:00:23, VLAN 1
B 50.0.0.0/8 [120/0] via 192.1.1.3, 00:00:41
C 192.1.1.0/24 is directly connected, VLAN 1
C 192.1.1.254/32 is local host.
Field
O
E2
20.0.0.0/8
[1/0]
Via 20.0.0.1
VLAN 1
DES-7200 CLI Reference Guide
Description
Source routing protocol, which may be:
C: directly connected route
S: static route
R: RIP route
B: BGP route
O: OSPF route
I: IS-IS route
Route type, which may be:
E1: OSPF external route type 1
E2: OSPF external route type 2
N1: OSPF NSSA external type 1
N2: OSPF NSSA external type 2
IA: OSPF area internal route
SU: IS-IS summary route
L1: IS-IS level-1 route
L2: IS-IS level-2 route
ia: IS-IS area internal route
Network address and
destination network
Manage metric
Next hop IP address.
Forwarding interface of next hop
mask of the