Showing Related Commands - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Version
description
48.1.5 ip ssh authentication-retries
Use this command to set the authentication retry times of the SSH Server. Use the no form
of this command to restore it to the default setting.
ip ssh authentication-retries retry times
no ip ssh authentication-retries
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Version
description

48.2 Showing Related Commands

The showing and monitoring commands of the SSH Server include:

show ip ssh
The software version must be R10.1 and higher.
Parameter Description
retry times Authentication retry times
The default authentication retry times is 3.
Global configuration mode.
User authentication is considered failed if authentication is not
successful when the configured authentication retry times on the SSH
server is exceeded. Use the show ip ssh command to view the
configuration of the SSH Server.
The following example sets the authentication retry times to 2:
DES-7210# configure terminal
DES-7210(config)# ip ssh ssh authentication-retries 2
Command Description
show ip ssh Show the current status of the SSH Server.
The software version must be R10.1 and higher.
Chapter 48 SSH Configuration Commands
48-5