Ipv6 Prefix-List Sequence-Number - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Examples
Related
commands

34.1.13 ipv6 prefix-list sequence-number

Use this command to add a sequence number for an IPv6 prefix list. Use the no form of this
command to remove the settings.
ipv6 prefix-list sequence-number
no ipv6 prefix-list sequence-number
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
Chapter 34 Protocol-independent Configuration Commands
The example below adds the description for the prefix list:
DES-7210# configure terminal
DES-7210(config)# ipv6 prefix-list pre description Deny
routes from Net-A
Command Description
ipv6 prefix-list Configure the IPv6 prefix list.
None
No sequence number is added for a prefix list, by default.
Global configuration mode
The example below adds a sequence number for the
prefix list:
DES-7210# configure terminal
DES-7210(config)# ipv6 prefix-list pre description Deny
routes from Net-A
Command Description
ipv6 prefix-list Configure the IPv6 prefix list.
34-15