Logging Trap - D-Link DES-7200 Cli Reference Manual

Chapter 66 Syslog Configuration Commands
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
66.1.8

logging trap

Use this command to set the severity of logs that are allowed to be sent to the syslog server.
The no format of the command restores it to the default value.
logging trap level
no logging trap
Parameter
description
Default
configuration
Command
mode
66-8
Debugging (7).
Global configuration mode.
To print log messages on the VTY window, execute first the privileged
user command terminal monitor. The level of logs to be displayed is
defined with logging monitor.
The log level defined with "Logging monitor" is for all VTY windows.
The example below sets the severity of log that is allowed to be
printed on the VTY window as 6:
DES-7210(config)# logging monitor informational
Command
logging on
show logging
Parameter
level
Informational(6).
Global configuration mode.
DES-7200 CLI Reference Guide
Description
Record logs on different devices.
Show the logs and related log configuration
parameters in the buffer.
Description
Severity of the log message. The name of the
severity or the numeral can be used. For the
details of log severity, see Table 60-1.