DES-7200 CLI Reference Guide
68
68.1 Related Configuration Commands
The LCD configuration commands include:
lcd trap-number num
memory-rate rising-threshold num
68.1.1
lcd trap-number num
Use this command to configure the length of alarm messages. Use the no form of this
command to restore the default value.
lcd trap-number num
no lcd rap-number
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
LCD
Commands
Parameter
Description
num
An integer in the range of 1 to1000.
The default value is 100.
Global configuration mode
Use this command to view the recently generated alarms. By default,
100 latest alarms are displayed. You can use this command to
change the number of the latest alarms displayed.
The following example shows 200 latest alarms.
lcd trap-num 200
Chapter 68 LCD Configuration Commands
Configuration
68-1