Cpu-Log - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
65.1.2

cpu-log

Use this command to configure the low and high threshold of the cpu log utilization limit
manually.
cpu-log log-limit low_num high_num
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Parameter Description
log-limit The command descriptor prompting the
log limit.
low_num Set the low threshold of the cpu log
utilization limit.
high_num Set the high threshold of the cpu log
utilization limit.
By default, the high and low threshold of the cpu log
utilization limit are 100% and 90%.
Global configuration mode.
Use this command to configure the low and high threshold
of the cpu log utilization limit manually. When the CPU
using rate is more than the high threshold, it prompts the
message; but if the CPU using rate exceeds the high
threshold continuously, it only prompts the message for
one time. When the CPU using rate is less than the low
threshold, it prompts the message and advertises that the
current CPU using rate has been down only when the CPU
high and low threshold switches over.
This example shows how to set the low and high threshold of the cpu
log utilization limit to 70% and 80% respectively.
DES-7210(config)# cpu-log log-limit 70 80
The console prompts as follows when the CPU utilization rate is more
than 80%:
Oct 20 15:47:01 %SYSCHECK-5-CPU_USING_RATE: CPU utilization in one
Chapter 65 CPU-LOG Configuration Commands
65-5