Accounting Commands - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
45.3.6
Use this command to apply the accounting command list to the specified terminal lines. The
no form of this command is used to disable the accounting function.
accounting commands level {default | list-name}
no accounting commands level
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related

accounting commands

Parameter Description
level The accounting command level, 0-15. The
message shall be recorded before determing
which command level is executed.
default Use the default method of accouting commands.
list-name Use a defined command accouting method list.
Disabled.
Line configuration mode.
Once the default command accouting method list has been
configured, it is applied to all terminals automatically. Once the
non-default command accounting method list has been configured, it
is applied to the line instead of the default method list. If you attempt
to apply a undefined method list, a warning message will prompt that
the command authorization in this line is ineffective till the accounting
command method list is defined.
The following example configures the accounting command method
list with name cmd, accounts the level-15 command, uses the
TACACS+ server. If the security server does not response, it does not
perform accounting. After configuration, the accounting command is
applied to VTY 0-4 lines:
DES-7210(config)# aaa accounting commands 15 cmd group tacacs+ none
DES-7210(config)# line vty 0 4
DES-7210(config-line)# accounting commands 15 cmd
Command
Chapter 45 AAA Configuration Commands
Description
45-21