Configuring Ospf Mib Binding; Configuring Ospf Trap - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
No.
1

4.12.2 Configuring OSPF MIB Binding

The MIB is a virtual database of the device status maintained by the managed devices.
Context
When multiple OSPF processes are enabled, you can configure OSPF MIB to select the process
to be processed, that is, configure OSPF MIB to select the process to which it is bound.
Do as follows on the OSPF router:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospf mib-binding process-id
OSPF MIB binding is configured.
----End

4.12.3 Configuring OSPF Trap

Traps are the notifications sent from a router to inform the NMS of the fault detected by the
system.
Context
Do as follows on the OSPF router.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent trap enable feature-name ospf { non-excessive all | trap-name
{ ospfifauthfailure | ospfifconfigerror | ospfifrxbadpacket | ospfifstatechange |
ospflsdbapproachingoverflow | ospflsdboverflow | ospfmaxagelsa |
ospfnbrrestarthelperstatuschange | ospfnbrstatechange |
ospfnssatranslatorstatuschange | ospforiginatelsa | ospfrestartstatuschange |
ospftxretransmit | ospfvirtifauthfailure | ospfvirtifconfigerror |
ospfvirtifrxbadpacket | ospfvirtifstatechange | ospfvirtiftxretransmit |
ospfvirtnbrrestarthelperstatuschange | ospfvirtnbrstatechange } }
Issue 01 (2012-03-15)
Data
OSPF process ID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 OSPF Configuration
133