Chapter 5 Device Management; Introduction To Device Management; Device Management Configuration; Restarting The Ethernet Switch - Huawei Quidway S3100 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S3100 Series Ethernet Switches

Chapter 5 Device Management

5.1 Introduction to Device Management

The device management function of the Ethernet switch can report the current status
and event-debugging information of the boards to you. Through this function, you can
maintain and manage your physical device, and restart the system when some
functions of the system are abnormal.

5.2 Device Management Configuration

The following sections describe the configuration tasks for device management:

Restarting the Ethernet Switch

Enabling the Timing Reboot Function

Specifying the APP Adopted When the Switch Starts Next Time
Updating the BootROM
5.2.1 Restarting the Ethernet Switch
You can perform the following operation when the switch is in trouble or needs to be
restarted.
Perform the following configuration in user view:
Table 5-1 Restart the Ethernet switch
Operation
Restart the Ethernet
switch
5.2.2 Enabling the Timing Reboot Function
After enable the timing reboot function on the switch, the switch will be rebooted on the
specified time.
Perform the following configuration in user view, and display schedule reboot
command can be performed in any view.
Command
reboot [ unit unit-id ]
Huawei Technologies Proprietary
5-1
Chapter 5 Device Management
Description
—