Reboot - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Table 3-1 Parameters of Reset Factory
Item
Reset Factory
Reset to factory , but keep IP
address
Reset switch to factory settings
Step 1 Click System Management > Reset Factory.
Step 2 Click Reset Factory.
Step 3 Click Apply button to apply all the changes made.
----End

3.2 Reboot

Click System Management > Reboot to bounce a device reboot webpage. Select System
Software and Configuration File options under the Next Startup File to set this switch to start
next time, the configuration page is as shown in Figure 3-2.
Figure 3-2 Set Startup File
Table 3-2 Parameters of Reboot
Item
Current Startup File
Next Startup File
Issue 05 (2012-10-25)
Description
Reset switch to factory default configuration.
Reset all configuration information of switch apart from
IP address.
Description
It shows the system software and configuration files currently
used by switch
System Software: select firmware version of next startup.
Configuration File:select configuration file of next startup.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 System Management
S1700 Managed Series Ethernet Switches
12